A3 Vehicles. Heavy equipment.
Instructions for Property Marking with Microdots and Glass Etching

Application of Microdots: Pour the varnish from the bottle marked 'Varnish' into the bottle marked 'Microdots'. Add the dropper, close the bottle using its lid, and shake it thoroughly. Clean the areas to be marked, then apply the varnish with microdots to the selected areas by gently squeezing the bottle filled with microdots and varnish. Correct the application with a brush. You can mark up to 50 places on each asset. Apply microdots in both visible and hidden locations - the more, the better. If there are any microdots left in the bottle, remove the dropper and use a brush to retrieve them. Affix the warning labels to all marked assets.

Register all marked assets using the registration card at www.thordots.com.

Instructions for Glass Etching: Clean the exterior of the glass to be etched and affix the etching template. Brush the etching paste onto the code present on the template. Leave the paste on for a minimum of 5 minutes. Remove the template and carefully rinse the etched code with water using a sponge. The code on the etching label corresponds with the code on the microdots and serves for quick checks by police or other authorities.